PUMPLIFE CONCEPTS TRANSOM TIE DOWN POINT

INSTRUCTIONS

THE PUMPLIFE CONCEPTS TIE DOWN POINTS ARE MADE OF 6061-T6 ALUMINUM. THEY ARE CNC MACHINED AND MADE IN THE USA.

PLEASE MEASURE YOUR TRANSOM ADAPTER AS SHOWN IN THE PHOTOS (EDGE TO HOLE CENTER). DUE TO THE VARIABILITY IN THE TRANSOM ADAPTERS, WE HAVE TWO TYPES OF TIEDOWNS AVAILABLE. CONTACT US IF YOU HAVE ANY QUESTIONS.

HOW THEY WORK:

• THE TIE DOWN BOLTS TO THE TRANSOM OF THE BOAT VIA 2X 1/4-20 FLAT HEAD SCREWS
• A 1/2" SHANK STAINLESS STEEL SHOULDER SCREW IS THREADED INTO THE 3/8-24 HOLE IN THE TIE DOWN
• THE BOAT IS STRAPPED DOWN TO THE TRAILER (LIGHTLY) TO AVOID BOUNCING OFF THE TRAILER FROM THE SHOULDER SCREW TO THE TRAILER.
• DO NOT MAKE THE STRAPS TIGHT! THIS IS MERELY TO KEEP THE BOAT SEATED ON THE BUNKS, NOT TO PUT PRELOAD ON THE BOAT. THE STRAP SHOULD HAVE ~1/4-1/2" PLAY BACK AND FORTH WHEN TIGHT.
• THESE ARE NOT FOR LIFTING AND ARE NOT RATED FOR ANYTHING BESIDES KEEPING THE BOAT FROM BOUNCING ON THE TRAILER.

TIE DOWN CONFIGURATIONS AVAILABLE:

• BERKELEY TRANSOM ADAPTER
• 3-1/2" BOLT CENTER- TRANSOM PLATE

KIT CONTENTS:

4X 1/4-20 X 2" SS FLAT HEAD SCREWS- HEX DRIVE

4X 1/4-20 NYLON INSERT SS LOCK NUTS

4X 1/4" X 1-1/4" ALUMINUM STRINGER WASHERS

4X 1/4" SS WASHERS

4X TAPERED SEALING WASHERS (BERKELEY ONLY)

2X 1/2" X 3/4" SHANK 3/8-24 THREAD SS SHOULDER SCREWS

2X DELRIN WASHERS

PUMPLIFE CONCEPTS TIE DOWN STRAPS ARE NOT INCLUDED, CLICK HERE TO ORDER.